Support Options
S-1 Embedment View Specifications
S-2 Surface Plate 39 SERIES
S-3 Gull-Wing
S-4 Sub-Floor |
• 3" X 4" EDGE SLATS AND 2" X 3" INTERIOR SLATS
• THREE CONTOUR STRAPS
Materials
Slats: 2" x 3" nom. interior and 3" x 4" edge slats in choice of Clear Douglas Fir or Ipe (all w/clear preservative treatment)
Supports: 1/2" x 3" steel bar,
2-1/2" square x 1/4" wall steel tube
Contour Straps: 3/8" x 1" steel bar
Fasteners: Stainless steel
Finish: See our options page for choice of polyester powder finish (shown in Black).
Douglas Fir Bench
39-60D 6' long, 2 supports, 150 lbs.
39-80D 8' long, 2 supports, 178 lbs.
Ipe Bench
39-60I 6' long, 2 supports, 196 lbs.
39-80I 8' long, 2 supports, 250 lbs.
|
